B199 Didn't you mean: other than the fact that the Enter key has historically (for three decades) been a wide key at the middle left position of the keyboard? Didn't you mean: other than the fact that there are three decades of dedicated HP calc users who are used to finding the Enter key where it has historically been? Didn't you mean: other than the fact that the sole reason why HP moved the Enter key to the lower right is so the HP calculators could be \just like a TI\ and not for any ergonomic reason? Well, if you ignore those facts then the current position of the Enter key on the HP-49s is the perfect place. X-RFC2646: Format=Flowed; Response X The ROM addresses changed a lot from the 48 to 49 transition so you need the source code for SysRPL UserRPL programs transferred in ASCII work fine. 1) Old models: HP 48G, 48G+, 48GX and the HP 49G 2) New models: hp 49g+, hp 48gII (note: this is still a 49 series calc sans \ Flash) These use ARM and a faster emulated Saturn The Algebraic models 1) Old: HP 39G, HP 40G (this one had the 49G CAS from ROM 1.19-1) 2) New: hp 39g+ This uses ARM and a faster emulated Saturn The ARM CPU can be under/overclocked in *SOFTWARE* All models except the top 49g+ use 131*64 screen [VPN] what you mean by 'algebraic' models means that these calcs don't have RPN ? if so, do they have xxRPL anyway ? -pacHa X-RFC2646: Format=Flowed; Response Yes Aplets is the specialty of these ALG-only models (dark side of the Force :) SysRPL is available usually very similar to the big-sister-models [VPN] What's 'Aplets' ? Ok I see -pacHa Can you tell me more about this under/overclocking? I run a site for the 39G family (www.hphomeview.com) and I've had a few inquiries about this from programmers using sRPL (which I don't) that I haven't been able to answer. See http://www.hphomeview.com/what_are_aplets.htm X-RFC2646: Format=Flowed; Response ClockSpeed Adjustment Tools - Overclock your 49G+ 2.00 http://www.hpcalc.org/details.php?id=6081 This is fot the 49g+ [VPN] posting-account=d8X8zw0AAAB_Eo2ldj3HF5DzN42pN3GY the this to By changing some internal settings it is possible to make the processor and memory change speeds. These are fairly simple programs and quite small. THye don't have a very large benefit currently, but hopefully will when there are more games availible since these don't need the full CPU speed. It can only be done using ARM programming to directly access the hardware. I would send anyone who asks about it to http://hpgcc.sourceforge.net/ . TW On Fri, 25 Feb 2005 17:43:31 -0500, Claudio Lapilli I really need now to read all the stuff I've been given :p -pacHa X-RFC2646: Format=Flowed; Original X X That's why the hp 49g+ has the SD card interface It is actually SDIO compatible \just\ use HPgcc or ARM assembler to write drivers to your favourite peripherals (-; If you want USB hosting and SD as well as the larger CF card for real expansion out of the box you need to wait for the Qonos I hope they have got the drivers working alright... [VPN] Same here in germany. The problem is, that many teachers/professors don't see the problems their students have - beacause the cannot imagine, that their students could have such problems. And with such a teacher/professor a low/middle ability student will *never* dive deeper into math. A very *important* thing. A CAS _can_ help, but it is, of course, not the solution to all problems. That is my dream ;-) I think it's really simple: in physics you had the real-world context. In math it was simply this: math. Volker -- Besides, i'm of the opinon, that TCPA has to be stopped Yipp. At school (long, long ago ;-) ) i had a classmate who was simply fantanstic in both, mathematics and physics. We met when i had to redo class 9 ;-) And i can rememeber that some days he just for fun did math, that we wouldn't learn before 12th class... Some of them not only don't agree, but simply don't understand. Bad for the low/avreage students, when even the teacher is one of those who doesn't understand... I fully agree, not only because i am one of those who _need_ real world context. Volker -- Besides, i'm of the opinon, that TCPA has to be stopped X-RFC2646: Format=Flowed; Original X What possibly you could have against the Texas Crime Prevention Asssociation (-; [VPN] *lol* That was not what i mean by TCPA. What i mean you cann read at www.againsttcpa.com The site is available on german and english. A Problem is, that the TCPA i mean has renamed to TCG which means \Trusted Computing Group\ Volker -- Besides, i'm of the opinon, that TCPA has to be stopped Maybe l look to http://commerce.hpcalc.org/ is helpful. Shipping from US to the netherlands or germany is 21USD by airmail and 33USD by expressmail. Erich Rechlin takes USD 80 for the 39+.... Volker -- Besides, i'm of the opinon, that TCPA has to be stopped X-RFC2646: Format=Flowed; Original Hi manjo, I was playing around with OF's menu commands with no argument given on the stack at level 1 and I got several TTRM. It would be better if there was somekind of error checking being done on those commands because many people \ may try OF and try running some of these commands just to see what they do and end up with TTRM, and that's not a pretty thing. Hope you can implemente it. Hugo Rodrigues the do Yes, I also think that Open Fire should have argument checking, to prevent the casual user from clearing their calc's memory. Anyone who wanted to bypass the argument checking could just use the internal rompointers. Bob Well it has -it checks for 2 or 3 arguments depending on command -some other commands may give you other type of warning if arguments are \ not suplied, however it's not checking for type so if you put 2 objects on stack and execute INITPF for example you may get very nasty (unpredictable) results. Of course i will see what i can do to make it safer manjo Yes, Yes, Yes. Oh PLEASE DO!!!! I just got my HP49G+ and I need a LOT of help. I would love to see a group specifically forthe 49G+. Tom I don't know why anyone's begging, when this can be done by anyone who cares to do it. In fact, I just did it. So go add information on the HP49G+ at http://riters.com/hp49gplus/. -- www.designacourse.com The Easiest Way To Train Anyone... Anywhere. Chris Smith - Lead Software Developer/Technical Trainer MindIQ Corporation posting-account=rQRNXw0AAABvdnK38E5FAQAwmqii-2hI Hi everyone... I'd like to know how can I hide the header (RAD XYZ DEC...) to use the whole screen for graphics on the 49G+, is this possible?, I was looking for that on the user manual with 0 results :(, may be is miss some pages... X-RFC2646: Format=Flowed; Original search www.hpcalc.org Wolfgang Rautenberg has viewers for that The original project did not have enough time for the expansion You can think the current situation like this: All the other HP calculators don't have full area AND the header available all the time. Only the 49g+ has this. [VPN] posting-account=rQRNXw0AAABvdnK38E5FAQAwmqii-2hI ------------ hello do you have any URL for that international convention? I'm so interesting to read about it. well, for 4^3^2^1... I think the answer has to be 262144, just take a paper and a pencil, like the school, you'll have to solve from the top to the bottom. it's true that some calcs (casio CFX 9850) and some math software (Matlab v6, Power One v4.0.2 for palm OS) shows 4096, but this is because the interpreter works from left to the right. This not means that left to right has to be the right way always! The right way always be the paper&pencil way. so... HP49G is correct!. good luck to everyone! NO! NO! NO! IT IS COMPLETLY WRONG ! Right association, in an exponent to another exponent means to MULTIPLY \ THEM: 2^1^3 = 2 ^(1*3) = 8 NOT 2 ^(1^3) THIS LAST ONE IS NOT CORRECT. Be aware please. Daniel X-RFC2646: Format=Flowed; Original Then we simply have to agree to disagree The right way (start from the right) 4^3^2^1 4^3^2 4^9 252144 The wrong way: 4^3^2^1 64^2^1 4096^1 4096 [VPN] Or the right way and the left way? X-RFC2646: Format=Flowed; Original Hi Bhuvanesh! I can't get the .89u ROM file to work with Virtual TI can point me to an easier access to TI testing? [VPN] Hello. I have the following problem: I can save a font to a file using fnc, but how do I edit and re-save my font? I haven't been able to figure it out. Is it possible? Perhaps using some external tools? Sergej Well IĞm sorry! Yes it is not possible to send the same message with 2 secs difference in \ between. Daniel X-RFC2646: Format=Flowed; Original All I can say is \thank goodness for blocked senders lists\ Bye bye Werty - get well soon.